Specification:

Neon or cold cathode dimmer and controller shall be listed in compliance with UL-1472 & CAN/CSA-C22.2 No 184.1 compliance for use with UL-2161 compliant, dimmable magnetic neon transformers. It shall be fully DMX-512 compliant and capable of running 7 internal stand-alone programs. It shall be for indoor use with three independently fused 450 VA outlets and one IEC type power supply cord.

Use: Indoors only

Supplied contents: Color/FX Creator 1, AC power cord, instruction booklet

INPUT:

Voltage: 120 Volts AC

Frequency: 50/60 Hz

Operating current: 0.2A-12A (max) (depends on load and/or DMX value)

Operating fuse: 12 A slow blow

Earth ground must be connected for safety.

OUTPUT per channel:

Voltage: 0-120 VAC (depends on load and/or DMX value)

Max output: 450 VA

Connection type: Portable installations, IEC type cord 7' switched (supplied).

Dimensions: L-7.75" x W-7.5" x H-4.5"

Weight: 2.8 lbs

Housing: Aluminum with black scratch resistant paint

Operating temperature: -10°C to + 50°C

Storage temperature: -20°C to + 85°C

Heat dissipation: Free convection

Air flow requirements: Allow for free air convection.
If unit shipped or transported, allow at least 4 hours before operating to avoid condensation.

INTERFACE OPTIONS:

Serial: USITT DMX-512, 1990

DMX addressing: Non Dip-switch, patented remote addressing, 1 to 512 address. Unit responds to the base address (user selectable) and next two consecutive channels.

DMX values: Base address: channel 1 control,(base add + 1)

channel 2, (base add + 2) channel 3.

Master/Slave: Up to 1 master and 31 slaves per differential pair.

Stand alone: Factory loaded programs*. Custom programs available

IR option: Up to eight units can be separately addressed, with 7 memory Presets per unit.

* Click here for Stand Alone Program description.

LED indicators:

OFF: Unit not powered or internal fuse blown

Solid ON: Unit powered

Flashing: Valid DMX detected, DMX operating mode

Fast flash: Unit addressed by infrared remote control

ITS independent laboratory testing for UL-1472 & CAN/CSA- C22.2 No 184.1 compliance, ETL listed

MultiNeon Ltd warrants that MultiNeon products under normal use in accordance with operating instructions, will perform to the specifications published by MultiNeon Ltd. at the time of purchase, for two (2) years, from the date of purchase by the consumer.

In the event of a defect reported by the consumer within the applicable time period, if any, MultiNeon Ltd. will, at its option, replace or repair the defective merchandise at no charge to the consumer for either parts or labor.

©2002, MultiNeon Ltd.

MultiNeon, Color/FX Creator, and Multineon PCDesigner are registered trademarks of MultiNeon Ltd.

As part of its policy of continuous research and product development, MultiNeon Ltd. reserves the right to change or withdraw specifications without prior notice.